Мощный аналитический грохот
ANALYSETTE 18
В стандартный комплект поставки мощного аналитического грохота ANALYSETTE 18 входят крепление, натяжная крышка сита для рассева в сухой среде и ПО AUTOSIEVE (тестовая лицензия на 90 дней).
Пожалуйста, обратите внимание: Для этого аналитического грохота Вам понадобятся еще аналитические сита и поддон сита.
Принадлежности для аналитических сит 400 мм Ø
У нас Вы найдете именно те принадлежности, которые Вам нужны для рассева: поддон сита, промежуточный поддон сита, комплект переналадки для рассева в жидкой среде и запасное уплотнительное кольцо.
Принадлежности для аналитических сит 400 мм Ø
For dry sieving with test sieves 400 mm diameter.
The sieve pan made of stainless steel completes the sieve stack.
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
For dry sieving with test sieves 400 mm diameter.
If several sieving operations should be carried out simultaneously, an interposed sieve pan must be used as sieve pan between the sieves.
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Consisting of clamping lid with wide spreading spray diffuser, sieve pan with outlet made of stainless steel 400 mm dia. and PVC-hose.
Venting ring for test sieves 400 mm dia. - required when utilizing test sieves < 100 µm. Venting rings are used to prevent the occurrence of air cushions during wet sieving.
replacement seal ring NBR for test sieves 400 mm dia.
Принадлежности для аналитических сит 200 мм Ø
Для использования сит диаметром 200 мм и 8" предлагается специальный переходник.
Принадлежности для аналитических сит 200 мм Ø
adapter polyamide for clamping lid for dry sieving with test sieves 200 mm/8" dia.
Принадлежности для автоматического ситового анализа
Мультиязыковое программное обеспечение AUTOSIEVE для управления ANALYSETTE 18 и для автоматического анализа, простого контроля и документации Ваших результатов рассева.
Принадлежности для автоматического ситового анализа
Software AUTOSIEVE-activation for installation on up to 3 Windows PC's after expiration of the free of charge test phase for FRITSCH software AUTOSIEVE for Windows.
System requirements - Software AUTOSIEVE
Minimum software requirements: Windows 7 or higher
Minimum hardware requirements: standard WINDOWS ™ PC with at least 2 Gbyte RAM
Your advantages with AUTOSIEVE:
- Automatic evaluation of your sieve Analysis
- Simple monitoring and documentation of your sieving results
- Suitable for all FRITSCH Sieve Shakers: Vibratory Sieve Shakers ANALYSETTE 3 PRO and ANALYSETTE 3 SPARTAN and the Heavy Duty Analytical Sieve Shaker ANALYSETTE 18
- After conducting your sieving– simply connect the laboratory analysis balance, then weigh the sieves before and after sieving using differential weighing – AUTOSIEVE will do the rest
- Extensive presentation of the results: presentation and printout as cumulative or frequency distribution and as graphs according to DIN ISO 9276-1
- Controlling of the Vibratory Sieve Shaker ANALYSETTE 3 PRO and entry of all functions such as amplitude, sieving time, interval operation and the type of sieving comfortable via the computer
- Monitoring of the sieving via the online-comparison of the set and actual amplitude and therefore an auto validation of the sieving process with the Vibratory Sieve Shaker ANALYSETTE 3 PRO
FRITSCH offers for the differential weighing of the sieves a special laboratory analysis balance for the Vibratory Sieve Shakers ANALYSETTE 3 PRO and SPARTAN, which you can order with the following order no. 03.2600.00.
A laboratory analysis balance for the Heavy Duty Analytical Sieve Shaker ANALYSETTE 18 is available on request.
Приспособление для очистки отверстий сита и чистящий концентрат для сита
Для рассева мелкозернистого материала или агломератов имеет смысл применять, например, вулколановые кубики. Эффективный рассев больших количеств. Мы предлагаем чистящий концентрат для сита.
Приспособление для очистки отверстий сита
1 vulkollan cube.
For sieving of fine-grained materials or agglomerates, the use of these vulkollan cubes is recommended.
Recommended quantity per sieve: minimum 10 cubes per sieve.
чистящий концентрат для сита
Can of 2.5 litres concentrated cleaning liquid, alkaline, for dilution 1:33.
Ideal for gentle and effective cleaning of your test and micro-precision sieves. With reliable protection
against corrosion of stainless steel, nickel and bronze.
| General specifications | ||
| Chemical formula | Combination of tensides, glycols and environmentally friendly complexing agents | |
| Regulations | Not subject to labelling requirements according to the EC-Guidelines for Hazardous Materials Ordinance | |
| Density | ~ 1.01 g/cm3 | |
| PH value | > 11 (undiluted) | |
| Toxicological information | non-irritant for skin, eyes etc. | |
| First aid | refer to enclosed label | |
| Environmental information | do not discard into groundwater, canalisation or bodies of water | |
| Disposal | Must be according to official regulations be specially treated prior to discarding | |
АНАЛИТИЧЕСКИЕ СИТА ИЗ НЕРЖАВЕЮЩЕЙ СТАЛИ, 400 ММ Ø, 65 ММ ВЫСОТА СОГЛАСНО ISO 3310-1
Для и рассева в сухой и жидкой среде с размерами ячеек от 20 мкм до 125 мм: особенно легкие, прочные и качественно изготовленные. Высоколегированная нержавеющая сталь защищает от коррозии и упрощает очистку. Переходы сетки без канавок предотвращают загрязнение просеиваемого материала. Каждое сито имеет лазерную гравировку, оптически измерено и поставляется с заводской справкой.
АНАЛИТИЧЕСКИЕ СИТА ИЗ НЕРЖАВЕЮЩЕЙ СТАЛИ, 400 ММ Ø, 65 ММ ВЫСОТА СОГЛАСНО ASTM E-11-1995
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request. All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel,with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mesh widths are also available as test sieves with 200 mm/8" dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Test sieve 400 mm dia., 65 mm useful height, frame and mesh wire made of stainless steel, with compliance certificate.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All above mentioned mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4404/316L |
| ISO/EN/DIN code | X2CrNiMo17-12-2 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | approx. 62.8 |
| Carbon – C | 0.03 |
| Silicon – Si | 1 |
| Manganese – Mn | 2 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.015 |
| Chromium – Cr | 18.5 |
| Molybdenum – Mo | 2.50 |
| Nickel – Ni | 13.00 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 8.0 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
АНАЛИТИЧЕСКИЕ СИТА ИЗ НЕРЖАВЕЮЩЕЙ СТАЛИ, 400 ММ Ø, 65 ММ ВЫСОТА СОГЛАСНО ASTM E11
Для и рассева в сухой и жидкой среде с размерами ячеек от 20 мкм до 125 мм: особенно легкие, прочные и качественно изготовленные. Высоколегированная нержавеющая сталь защищает от коррозии и упрощает очистку. Переходы сетки без канавок предотвращают загрязнение просеиваемого материала. Каждое сито имеет лазерную гравировку, оптически измерено и поставляется с заводской справкой.
АНАЛИТИЧЕСКИЕ СИТА ИЗ НЕРЖАВЕЮЩЕЙ СТАЛИ, 400 ММ Ø, 65 ММ ВЫСОТА СОГЛАСНО ASTM E11
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request. All mesh widths are also available as test sieves with 200 mm/8“ dia. Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
Frame and mesh wire made of stainless steel, with compliance certificate 400 mm dia., useful height 65 mm.
Test sieves and sieving accessories in other diameters and mesh widths on request.
All mesh widths are also available as test sieves with 200 mm/8“ dia.
Test sieves and sieving accessories are not subject to exchange!
| General specifications | |
| Material | Stainless steel – 1.4301 |
| ISO/EN/DIN code | X5CrNi18-10 |
| Chemical composition | |
| Element | Share % |
| Iron – Fe | 66.75 |
| Carbon – C | 0.070 |
| Silicon – Si | 1.000 |
| Manganese – Mn | 2.000 |
| Phosphorus – P | 0.045 |
| Sulphur – S | 0.030 |
| Chromium – Cr | 19.5 |
| Nickel – Ni | 10.5 |
| Nitrogen – N | 0.110 |
| Physical and mechanical properties | |
| Density | 7.9 g/cm³ |
| Hardness | 215 HB |
Explanations on hardness data
СЕРТИФИКАЦИЯ
Документация IQ/OQ (формат вопросника - реализация заказчиком) для самостоятельного использования в целях поддержки квалификации приборов в системе менеджмента качества для Мощный аналитический грохот ANALYSETTE 18.
Certification
IQ/OQ documentation (questionnaire format - implementation by customer) for the independent utilization for the support of instrument qualification in the quality management system for the Heavy Duty Analytical Sieve Shaker ANALYSETTE 18.
