Вибрационная микромельница

PULVERISETTE 0

ЗАПРОСИТЬ ИЗДЕЛИЕ

General material specification:
Material: agate - SiO₂
Abrasion resistance: good
Suitable for: soft to medium-hard samples
Detailed information about the material you will find in the element analysis.

ЗАПРОСИТЬ ИЗДЕЛИЕ

General material specification:
Material: sintered corundum 1 - Al₂O₃
Abrasion resistance: fairly good
Suitable for: medium-hard, fibrous samples
Detailed information about the material you will find in the element analysis.

ЗАПРОСИТЬ ИЗДЕЛИЕ

General material specification:
Material: zirconium oxide ZrO₂
Abrasion resistance: very good
Suitable for: fibrous, abrasive samples
Detailed information about the material you will find in the element analysis.

ЗАПРОСИТЬ ИЗДЕЛИЕ

General material specification:
Material: hardened, stainless steel - Fe-Cr
Abrasion resistance: good
Suitable for: medium-hard, brittle samples, suitable for cryogenic grinding
Detailed information about the material you will find in the element analysis.

ЗАПРОСИТЬ ИЗДЕЛИЕ

General material specification:
Material: hardmetal tungsten carbide - WC
Abrasion resistance: very good
Suitable for: hard, abrasive samples, very suitable for cryogenic grinding
Detailed information about the material you will find in the element analysis.

ЗАПРОСИТЬ ИЗДЕЛИЕ

General material specification:
Material: agate - SiO₂
Abrasion resistance: good
Suitable for: soft to medium-hard samples
Detailed information about the material you will find in the element analysis.

We also offer a grinding ball made of agate with 70 mm dia. This 70 mm grinding ball causes a higher application of energy, but is only suitable for grinding fine materials and therefore only be recommendable for special applications.

ЗАПРОСИТЬ ИЗДЕЛИЕ

General material specification:
Material: agate - SiO₂
Abrasion resistance: good
Suitable for: soft to medium-hard samples
Detailed information about the material you will find in the element analysis.

The grinding ball made of agate with 50 mm dia. is recommended as standard.

ЗАПРОСИТЬ ИЗДЕЛИЕ

General material specification:
Material: sintered corundum 1 - 99.7 % Al₂O₃
Abrasion resistance: fairly good
Suitable for: medium-hard, fibrous samples
Detailed information about the material you will find in the element analysis.

ЗАПРОСИТЬ ИЗДЕЛИЕ

General material specification:
Material: zirconium oxide ZrO₂
Abrasion resistance: very good
Suitable for: fibrous, abrasive samples
Detailed information about the material you will find in the element analysis.

ЗАПРОСИТЬ ИЗДЕЛИЕ

General material specification:
Material: hardened, stainless steel - Fe-Cr
Abrasion resistance: good
Suitable for: medium-hard, brittle samples
Detailed information about the material you will find in the element analysis.

ЗАПРОСИТЬ ИЗДЕЛИЕ

General material specification:
Material: hardmetal tungsten carbide - WC
Abrasion resistance: very good
Suitable for: hard, abrasive samples
Detailed information about the material you will find in the element analysis.

ЗАПРОСИТЬ ИЗДЕЛИЕ

Device for grinding in liquid nitrogen.
The grinding set is placed in a cryo-box to grind soft, oily, fatty or moist materials by adding liquid nitrogen to embrittle the grinding material. This method is used to reduce samples which are very difficult to grind (e. g. slivers of soft PVC) to analytical fineness. The thick insulation of the cryo-box keeps coolant costs low.
For cryogenic grinding, a mortar and a grinding ball made of stainless steel, tempered steel or hard metal tungsten carbide should be used.

Please note: Grinding sets made of agate and sintered corundum cannot be used in the cryo-box.

ЗАПРОСИТЬ ИЗДЕЛИЕ

To reduce the grinding sound, we recommend the sound absorption hood made of plexiglas.

ЗАПРОСИТЬ ИЗДЕЛИЕ

For dry sieving with test sieves 200 mm/8" dia.

The clamping lid made of plexiglas allows the operator to observe the sieving process.
For applications, where it is not required to observe the sieving process, a clamping lid without window insert article no. 31.2050.00, is also available.
This clamping lid can also be used if you would like to use the Vibratory Micro Mill PULVERISETTE 0 as a Vibratory Sieve Shaker ANALYSETTE 3 SPARTAN. The needed sieve pan and the sieves must be ordered separately.

ЗАПРОСИТЬ ИЗДЕЛИЕ

For dry sieving for all test sieves up to 200 mm/8" dia.

The POM plastic clamping lid without window for applications, where it is not required to observe the sieving process, respectively in order to sieve materials where a metallic contamination must be avoided. For applications, where it is required to observe the sieving process, a clamping lid with window insert article no. 31.2020.00, is also available.
This clamping lid can also be used if you would like to use the Vibratory Micro Mill PULVERISETTE 0 as a Vibratory Sieve Shaker ANALYSETTE 3 SPARTAN.
The needed sieve pan and the sieves must be ordered separately.

ЗАПРОСИТЬ ИЗДЕЛИЕ

With 2 rotation nozzles for wet sieving with test sieves 200 mm/8" dia.

The wet clamping lid features 2 rotation nozzles which sprays the entire interior chamber, thus helping to flush the material through the sieve apertures.
Especially recommended for materials with a high electrostatic charge or very high content of fine material. This clamping lid can also be used if you would like to use the Vibratory Micro Mill PULVERISETTE 0 as a Vibratory Sieve Shaker ANALYSETTE 3 SPARTAN. The needed sieve pan and the sieves must be ordered separately.

ЗАПРОСИТЬ ИЗДЕЛИЕ

IQ/OQ documentation (questionnaire format - implementation by customer) for the independent support of instrument qualification in the quality management system for the Vibratory Micro Mill PULVERISETTE 0.